Car Detailing Secrets – The Best Ones for a Shining Car

It is a known fact that car detailing is the ideal procedure to bestow a dazzling appearance to your car. The interior and exterior portions are thoroughly washed, wiped and cleaned to remove the dust and dirt. Finally, wax, sealant and ceramic pro coating are applied on your car’s exterior to prevent the paint from any further damage. All these steps give your car a brand-new look. But have you wondered how car detailing professionals in Calgary or elsewhere, can keep your car shining and well-maintained for such a long time?

 

Secrets of car detailing calgary

 

Caring for your car is necessary to maintain your vehicle’s functions and enhance your investment’s value. But if you are frequently left disappointed with your car caring results, it is time you become aware of some of the best car detailing secrets.

 

Car detailing in Calgary SW is certainly all about washing, waxing, and polishing but with the car detailing secrets mentioned below, you can make the most of your detailing efforts.

 

1. Dry glass surfaces in two directions –

 

Sometimes after cleaning and drying your car’s windows, you may suddenly notice a water streak either on the inside or outside the glass. If you encounter this problem very often after every time you detail your vehicle, practice drying the exterior glass in one direction and the interior glass in the other. For instance: clean the exterior of the window horizontally and the interior glass vertically. By doing this, you will know whether the streak is present on the outside or inside and quickly be able to remove it.

 

2. Remember to clean the window tops –

 

Most of the car detailers miss out on cleaning the window tops. So the next time you go for car detailing in Calgary NW, NE, SW or elsewhere, remind the detailers to roll down the windows and clean the topmost portion of the window glass. Sometimes residues from the car cleaning products accumulate in the window jamb that causes the window to have streaks and other stains as soon as you wind up the windows. By doing this, expect your window tops to receive professional cleaning that will remove any kind of dirt, marks or residues.

 

3. Use a power buffer to apply wax & not to remove it –

 

A power buffer is a good tool to yield great post-waxing results for your car. However, many car lovers are unaware that a power buffer must not be used to remove wax since it leaves your car exterior with uneven finish and swirls. Instead, use a soft dry cloth to remove the wax; use a power buffer only to apply the wax and nothing more.

 

4. Use a plastic bag to check the car’s surface –

 

It is always important to check your vehicle’s surface before finally applying a fresh coat of wax. This is done to ensure the complete removal of dirt and grease from the car’s surface. But to do this, you may have fingerprints all over your gleaming car’s exterior right? Not at all! Just wear a plastic bag in your hand and touch your car’s surface to feel for any bumps of dirt.

 

Conclusion –

 

Car detailing, when done in the right way, can give you amazing long-lasting results. If you are unable to achieve satisfying detailing results, it is a sign asking you to change your detailing methods. Hence the next time you visit an outlet for car detailing in Calgary NE, remember to implement these practices. To know more about our car detailing services in Calgary, get in touch with us.

Leave a comment

Your email address will not be published. Required fields are marked *